Introduction to Limits

Limits ยท Instructor-approved lesson ยท due 2026-11-30

๐ŸŽฏ Learning Objectives

  • Understand the intuitive and formal concept of a limit.
  • Evaluate limits graphically, numerically, and algebraically.
  • Recognize when a limit exists or does not exist.
  • Apply limit laws to simplify and compute limits.

๐Ÿ“– Lesson Content

What Is a Limit? introduction

In calculus, the concept of a **limit** describes the behavior of a function as its input approaches a particular value. It answers the question: *What value does $f(x)$ get close to as $x$ gets close to $c$?* Importantly, the limit does not depend on the value of $f(c)$ โ€” the function doesn't even need to be defined at $c$. We are only concerned with the trend of $f(x)$ as $x$ approaches $c$ from both sides. For example, consider the function: $$ f(x) = \frac{x^2 - 1}{x - 1} $$ At $x = 1$, the function is undefined (division by zero). But as $x$ gets closer to 1, what happens to $f(x)$?

$f(x) = \frac{x^2 - 1}{x - 1}$

Definition of a Limit definitions

We write $$ \lim_{x \to c} f(x) = L $$ to mean that as $x$ approaches $c$ (from both the left and the right), the value of $f(x)$ approaches $L$. This is called the **limit of $f(x)$ as $x$ approaches $c$**. For the limit to exist: - The left-hand limit $\lim_{x \to c^-} f(x)$ must exist. - The right-hand limit $\lim_{x \to c^+} f(x)$ must exist. - These two one-sided limits must be equal: $\lim_{x \to c^-} f(x) = \lim_{x \to c^+} f(x) = L$.

$\lim_{x \to c} f(x) = L$

$\lim_{x \to c^-} f(x) = \lim_{x \to c^+} f(x) = L$

Evaluating Limits explanation

There are several ways to evaluate limits: 1. **Graphical Method**: Examine the graph of $f(x)$ and observe the $y$-value that the function approaches as $x \to c$. 2. **Numerical Method**: Create a table of values of $f(x)$ for $x$ close to $c$ from both sides. 3. **Algebraic Method**: Use algebra (factoring, simplifying, rationalizing) to rewrite $f(x)$ in a form where substitution works. If $f(x)$ is continuous at $x = c$, then: $$ \lim_{x \to c} f(x) = f(c) $$ This applies to polynomials, rational functions (where defined), and many other common functions.

$\lim_{x \to c} f(x) = f(c)$

Example: Evaluating a Limit Algebraically worked example

Evaluate: $$ \lim_{x \to 1} \frac{x^2 - 1}{x - 1} $$

$\lim_{x \to 1} \frac{x^2 - 1}{x - 1}$

Worked example 1

Problem: $\lim_{x \to 1} \frac{x^2 - 1}{x - 1}$

  1. $\frac{x^2 - 1}{x - 1} = \frac{(x - 1)(x + 1)}{x - 1}$
    Factor the numerator using the difference of squares identity: $a^2 - b^2 = (a - b)(a + b)$.
  2. $= x + 1 \quad \text{for } x \ne 1$
    Cancel the common factor $x - 1$, valid as long as $x \ne 1$ (which is acceptable since limits consider values near, not at, the point).
  3. $\lim_{x \to 1} (x + 1) = 1 + 1 = 2$
    Now the function $x + 1$ is continuous at $x = 1$, so we can substitute directly.

Answer: $2$

Graphical Insight visualization

The graph of $f(x) = \frac{x^2 - 1}{x - 1}$ is identical to the line $y = x + 1$, except at $x = 1$, where there is a **removable discontinuity** (a hole). As $x$ approaches 1 from either side, $f(x)$ approaches 2, even though $f(1)$ is undefined. This confirms: $$ \lim_{x \to 1} \frac{x^2 - 1}{x - 1} = 2 $$

$f(x) = \frac{x^2 - 1}{x - 1}$

$y = x + 1$

$\lim_{x \to 1} \frac{x^2 - 1}{x - 1} = 2$

Common Misconceptions misconceptions

- **Misconception 1**: "If $f(c)$ is undefined, then $\lim_{x \to c} f(x)$ does not exist." - **Correction**: A function can have a limit at $c$ even if it is undefined there. The limit depends on behavior *near* $c$, not *at* $c$. - **Misconception 2**: "The limit is just $f(c)$, so plug in the value." - **Correction**: This only works if the function is continuous at $c$. Always check whether direct substitution is valid. - **Misconception 3**: "If both sides go to infinity, the limit is infinity." - **Correction**: While we may write $\lim_{x \to c} f(x) = \infty$, this means the limit **does not exist** in the strict sense โ€” it diverges to infinity.

Practice Problems practice

Evaluate the following limits: 1. $\lim_{x \to 3} \frac{x^2 - 9}{x - 3}$ 2. $\lim_{x \to 0} \frac{\sqrt{x + 4} - 2}{x}$ 3. $\lim_{x \to 2} \begin{cases} x^2, & x < 2 \\ 3x - 2, & x \geq 2 \end{cases}$

Check Your Understanding comprehension check

Answer true or false: 1. If $\lim_{x \to c} f(x) = L$, then $f(c) = L$. 2. A limit can exist even if the function is undefined at $x = c$. 3. If the left-hand and right-hand limits are not equal, the two-sided limit does not exist. Answers: 1. False, 2. True, 3. True.

Summary summary

- A limit describes the behavior of a function as $x$ approaches a value $c$, regardless of $f(c)$. - The limit $\lim_{x \to c} f(x)$ exists if and only if both one-sided limits exist and are equal. - Techniques for evaluating limits include factoring, rationalizing, and using limit laws. - Direct substitution works only when the function is continuous at $c$. - Limits are foundational for defining derivatives and continuity.

$\lim_{x \to c} f(x)$

โœ๏ธ Check Your Understanding

Ungraded practice โ€” try each item, then check the lesson content above. Full Socratic help is in the Practice workspace.

Item 1 Practice Problems
$\lim_{x \to 3} \frac{x^2 - 9}{x - 3}$

Item 2 Practice Problems
$\lim_{x \to 0} \frac{\sqrt{x + 4} - 2}{x}$

Item 3 Practice Problems
$\lim_{x \to 2} \begin{cases} x^2, & x < 2 \\ 3x - 2, & x \geq 2 \end{cases}$